ProAir 12V Air Conditioning System
Frequently asked questions, links and help.
If you have any other questions, do not hesitate to email us email@example.com
How does a A/C System work?
This is a basic question and is required to understand what all components of a A/C do in order to place them in your van or RV build. We highly recommend this basic outline read of how a A/C system works: Click Here
What is the system designed for and who?
This system was originally designed for Roadtrek Class B E-trek vans. Lithium Batteries became standard pieces of equipment and boon docking had become popular. As a result a need arose for a 12V A/C system. Roadtrek worked with ProAir of Indiana and this system was the fruits of their labor. This is the third generation system which uses an ultra reliable Benling Compressor.
Is this a variable speed or multi-speed system?
Yes. absolutely. The system is designed with 7 blower (evaporator) speeds so you can fine-tune how much air circulates in your van, and the compressor has 3 speeds. Only 2 of the 3 speeds are in use on the compressor. Low and medium. For a class B van it was decided that the compressor had enough cooling capacity at those lower speeds that the 3rd higher speed was not uses to keep the system power draw down. The compressor is also a inverter driven variable speed compressor it has soft starts and ramps up to speed and ramps down instead of on/off.
What kind of power draw can I expect?
Power draw is measured in Watts, as voltage decreases amperage increases but the only measure that remains stable is Wattage. Typical operating conditions show a 1100W amp draw. Meaning that at a 14V battery voltage, the unit will draw 78Amps. This is both condenser fans running, evaporator on high speed and compressor on medium speed (max speed in present configuration)
What sort of temp drop can I expect?
The Delta T will be similar to your home. You can expect a 25-30°F temp drop with the compressor running on medium speed. If you require a larger temp drop and would prefer to run the compressor in high speed, you can expect a 30-35°F temp drop.
Will it also function as a heat pump?
No, unfortunately at present there are no 12V reversing valves on the market or controllers that can handle this. Once a 12V reversing valve becomes available we will research and develop a system that can also act as a heat pump.
Can the blower also be used for heat?
Yes! The 981 evaporator (blower) can have a hydronic heating coil installed in the casing. The digital mini thermostat can also be swapped over to a heat-capable thermostat and you can wire a Espar or equivalent hydronic heater into the system to use the same ducting, blower and thermostat for heating as well as cooling. Please contact us for more details.
Does it come with mounting brackets?
The evaporator (blower) comes with its own mounting brackets to secure it to a floor or cabinet.
The compressor comes with rubber isolating mounts so it can be mounted to a bracket or the chassis. If you would like a ready-made angle bracket, we recommend a Viair 95900 which can be purchased for about $25 on Amazon link
(click on thumbnail for full image)
We offer two types of Condensers.
The Stainless Steel 105 condenser is a vertically mounted condenser that was originally designed to be mounted behind the rear axle of an extended van. The mounting brackets are installed on the condenser and it is bolted directly to the floor of the van via rivnuts or nuts/bolts depending on accessibility. The 105 can also be mounted vertically next to a fuel tank or in place of a spare tire if overall clearance permits. (it is 12.5" tall) (click on thumbnail for full image)
Mounted Sideways (From Snow & Curt on Youtube, see here link)
The 105 Condenser is a upgrade at the time of purchase for $50, Please include this at the time of purchasing your kit: Click here
The standard white 109 condenser is a flat or angle mounted condenser. There are multiple styles of brackets available for this condenser, but not included with the sale of the A/C system. ProAir manufactures both brackets for the NCV3 144" Sprinter which positions this condenser on an angle see here: Link They also manufacture a Ford transit set of brackets that position the condenser completely flat next to the fuel tank. (click on thumbnail for full image)
Depending on current stock levels the 109 brackets can either be purchased from us or ProAir themselves and are relatively inexpensive.
Sprinter 144" Front PN: 06 000 707
Sprinter 144" Back PN: 06 000 719
New! Sprinter Brackets for the 144 Now available from us: Click Here
Ford Transit Front PN: 06 001 735
Ford Transit Back PN: 06 001 736
New! Ford Transit Brackets Now available from us: Click Here
Make your own brackets
Depending on your application you may choose to make your own brackets. A few spots allow for the horizontal mount condenser to be flat mounted directly into the Ford Transit frame. See below for a couple examples. (click on thumbnail for full image)
Standard Length Ford Transit
Extended Length Ford Transit
What are the evaporator blower differences with the two units you sell?
The 916 evaporator/blower is a cabinet unit that is intended to be mounted high with a direct output via a residential style register/grate cover. This will not require any additional ducting and saves the most amount of space.
The 918 evaporator/blower is a ducted blower that uses standard 2.5" A/C duct outputs used in the automotive industry. It will still require a register/grate opening to suck air into the evaporator, but the climate controlled air output is via the A/C ducts. These are typically placed under cabinets or under rear beds.
How loud is it?
The early version of this kit (Generation 1) had a loud fan on the compressor case. This version (generation 3) does not and the compressor is cooled on its own and is relatively quiet. The dual condenser fans are the loudest part of the system, and with a direct line of sight measure 71dB at 4' away. (same as a Dometic Penguin II rooftop 115V unit).
If you are looking to "take the edge off" with the air conditioner system you can quiet down the condenser with one of two ways. You can wire the dual fans in a series, and run them at half the voltage/half the speed. This will affect the overall efficiency of the system. The second way is the use of a capillary thermostat. This is a switch that will turn on the second condenser fan when the temp exceeds a threshold. These are relatively inexpensive and simple to install. (click on thumbnail for full image)
What else will you need?
You will be required to provide the 6Gauge wiring to run to the control panel and to the compressor from your battery and/or electrical system as well as a 150A Circuit breaker to protect the circuit. You will also be required to rent, purchase or borrow a Pex style Knipex tool to crimp the A/C line connections.
Installation Manual Download here
Troubleshooting Guide Download here